Types of hinges

1. According to the material classification, it is mainly divided into: stainless steel hinge, iron hinge, damping hinge.

2. According to the degree of cabinet door panel covering the side panel, the hinge can be divided into: full cover, half cover, no cover, that is, straight bend, middle bend, large bend.
The combination of cabinets includes full cover, half cover and no cover, which respectively refers to the situation where the cabinet door completely blocks the side panel, the cabinet door partially blocks the side panel and the cabinet door does not cover the side panel at all. In order for the door to be fully opened, the three combinations must correspond to the straight arm, semi-bend and large bend of the hinge. This is to make the edge of the cabinet door to the hinge fixing point have enough length, so that the cabinet door opens and closes enough space to move, if the distance is too short, the cabinet door cannot be fully opened, the uncovered cabinet door with a large bend, is to extend this distance.

3. According to the fixing method of the hinge, it can be divided into: fixed type, unloading type.

4. According to the function, it is divided into: one stage force and two stage force. Damping cushioning.

5. Bridge hinge
Cabinet doors, wardrobe doors are mainly spring hinges: can be divided into two types: holes that need to be punched, and no holes are required. No need to make holes is what we call bridge hinges. The bridge hinge looks like a bridge, so it is commonly known as a bridge hinge. It features no need to drill holes in the door panels and is not limited by specifications.

The bridge hinge looks like a bridge, so it is commonly known as a bridge hinge. It features no need to drill holes in the door panels and is not limited by specifications.